|
Do you ever need to draw lines at the
same angle, other than orthographically, multiple times in a drawing
session? The easiest way to accomplish this is to set the Polar
increment angle to your desired angle. Right-click on the POLAR button
at the bottom of your screen and pick Settings. In the Increment angle
pull-down, chooses the angle you need. If it is not listed, click in
the Additional angles box and specify your own. Turn Polar Tracking
On, and you now have the ability to draw at the specified angle increments,
accurately, as well as using the standard Ortho techniques. Turn the
POLAR button off and all you have is the standard Ortho with 0, 90, 180, and
270, if it is turned On.
If you need to specify a different
angle for your cursor permanently, or if it changes for any reason other
than 0, 90, 180, and 270, right-click on the SNAP button and pick Settings.
in the Snap area change the angle to that which is desired, and finish out
the dialogue box with the OK button. Your cursor is now locked into
that angle. Toggle back by changing the snap angle back to 0.
|
